YTZ-150 type resistance remote transmission pressure gauge and YTZ-150B type stainless steel resistance remote transmission pressure gauge are suitable for measuring the pressure of gases and liquids that do not corrode copper and copper alloys, or stainless steel alloys. The resistance remote pressure gauge transmits the measured value to the secondary instrument far away from the measuring point through the locator-type sensor installed inside the instrument to realize centralized detection and remote control. In addition, the resistance remote pressure gauge can indicate on the spot at the same time pressure for easy on-site process inspection.

The resistance remote pressure gauge can be connected with the diaphragm isolator (diaphragm body) to make a diaphragm type resistance remote pressure gauge, which is used to measure the pressure of the medium with strong corrosiveness, high viscosity and easy crystallization.

Main technical indicators of resistance remote pressure gauge

1. Basic error: plus or minus 1.6 grades.

2.: Measuring range: (Mpa)

(Special specifications, please specify when ordering)

0-0.16 0-0.25 0-0.4 0-0.6

0.1 0-1.6 0-2.5 0-4

0-6 0-10 0—16 0-25 0-40

-0.1-0.06 -0.1-0.15 -0.1-0.3 -0.1-0.5

-0.1-0.9 -0.1—1.5 -0.1—2.4

3. Working conditions (1) Ambient temperature: -40-60℃

(2) Working pressure: static load:

Use up to 3/4 of the upper limit of measurement

Alternating load: up to 2/3 of the upper limit of measurement

Short-time pressure: use up to the upper limit of measurement

(3) Relative temperature: <85%

4. Technical data of sliding wire resistance transmitter: Initial resistance: 3-20Ω

Full scale resistance: 340-400Ω

The applied voltage of the terminal is <6V

5. The outer diameter of the instrument: Φ150mm

6. Connection size: M20X1.5