TVVB-Elevator Flat Cable

Use features

1. AC rated voltage: U0/U 0.6/1KV **Working temperature: 180℃ **Ambient temperature: fixed laying -60℃ 2. The installation and laying temperature of flat cable should not be lower than -25℃.

3. The allowable bending radius of the cable: the minimum cable is 15 times the outer diameter of the cable. The structural characteristics of the flat cable

1. The conductive core adopts a soft structure to ensure good flexibility of the cable.

2. The insulation and protective layer materials are made of butyl polymer, which improves the softness and anti-corrosion and cold-resistant properties of the cable.

3. Color separation of insulated wire cores to provide convenience for laying and installation

Structural characteristics of elevator flat cable

1. The conductive core adopts a soft structure to ensure good flexibility of the cable.

2. The insulating and protective layer materials are made of butyl polymer, which improves the softness and anti-corrosion and cold-resistant properties of the cable.

3. Color separation of insulated wire cores provides convenience for laying and installation.

4. According to customer needs, wire ropes or other load-bearing elements (TVVBG type) can be added on both sides of the cable core.

  Features

Especially soft, especially resistant to bending, moving back and forth, stable and not twisting.

Indoor and outdoor, adapt to temperature, acid, alkali, oil and salt, can protect.

  main products

Elevator PVC insulated and sheathed flat flexible cable

Product model: TVVB (ordinary type)

TVVBG (Reinforced-Wire Rope)

TVVBP (shielded type)

TVVBPG (enhanced, shielded type)

The main performance of the cable (complies with Q/ZB01-2002)

The rated working voltage of the cable is AC 450/750V and below.

The ambient temperature of the cable is -40℃～70℃.

The minimum bending radius of the cable is 10 times the length of the small side of the cable.

The finished cable cores are subjected to AC 50Hz, 2.5Kv test voltage for 5min without breakdown.

The minimum tensile strength of insulation and sheath is 10N/mm2, the minimum elongation at break is 150%, the winding at -40°C has no cracks, and the minimum elongation at -40°C is 20%.

The flat cables of our factory can be widely used in power connection and control, signal and power supply of various mobile power devices of 450/750V and below in elevators, hoisting, transportation, machinery, electrical, steel, metallurgy, port, mining, logistics, warehousing and other industries. , lighting, etc.

Packaging, transportation and storage of cables:

Cables can be packaged in circles or in reels.

Cable transportation should ensure that the packaging is intact and prevent mechanical bumps.

Long-term storage should avoid low temperature below -20°C and high temperature above 50°C.