1. Product Overview Product Overview

UHZ series side-mounted magnetic flap liquid level gauge products can achieve high sealing, anti-leakage and safe and reliable liquid level measurement under high temperature, high pressure, high viscosity and strong corrosive conditions. intuitive

technical parameter:

1. Installation method: side mounted top mounted

2. Measuring medium: such as water, oil, other chemical solvents and liquid raw materials

3. Material requirements: such as 304 stainless steel, 316L stainless steel, stainless steel lined with PTFE, PP, PVC (if the user is not clear, after providing relevant parameters, our technical staff can help choose the place)

4. Measure the temperature of the medium: The difference in temperature determines the different choices of the material type of the float and the display panel. When the temperature is too low in winter, it is necessary to install a potential heat or a steam jacket for heat preservation. The temperature of the medium that can be measured by the liquid level gauge is -20℃~500℃.

5. Working pressure: The size of the pressure determines the thickness of the main pipe and the difference in processing techniques such as welding. The maximum pressure of the medium that the level gauge can measure can reach 10MPa.

6. Connection method: The top-mounted magnetic flap liquid level gauge series products generally use DN80 or DN100 connection flanges, and the side-mounted magnetic flap liquid level gauge adopts three connection methods: flange connection (such as DN25), clamp connection, threaded connection.

7. Measuring range:

1. Because the side-mounted type is connected to the container to be measured through two upper and lower conduits, the measurement range is the distance between the centers of the two conduits, referred to as the center distance. 2. The top-loading type is inserted into the container from the top, so its measurement range is the distance that needs to be measured between the top and bottom of the container.

8. Remote transmission and alarm signal: The magnetic flap level gauge can realize remote transmission of 4-20mA, 485 communication, Modbus protocol and switch signal and alarm functions.

2. Working principle of side-mounted magnetic flap level gauge

A new type of instrument that uses the magnetic steel in the float to drive the flip of the two-color sheet to indicate the liquid level. The magnetic float in the main body of the magnetic flap level gauge moves up and down with the rise and fall of the liquid level, and at the same time drives the two-color sheet in the indicator outside the main body to turn over. When there is a liquid level, it turns red, and when there is no liquid level, it turns white. The line between the red and white bands represents the liquid level height. On the left side of the indicator there is a prominent graduated scale.

Magnetic flap level gauge classification and applicable occasions

3. Main technical indicators of side-mounted magnetic flap level gauge:

1. Measuring range (mm): Measuring range: 300~18000mm

2. Medium density (g/cm3): 0.5～2

3. Medium viscosity: ≤0.02Pa.S

4. Working temperature ℃: -40～350

5. Working pressure: ≤2.5MPa (common type)

                 ≤10.0MPa (high pressure type)

                 ≤32.0MPa (ultra high pressure type)

                 ≤2.5MPa (anti-corrosion type)

6. Measurement accuracy (mm): ≤±10

7. Installation method: side-mounted magnetic flap level gauge, top-mounted, bottom-mounted

8. Protection class: IP65

9. Explosion-proof grade: ibⅡCT4 (intrinsically safe), dⅡBT4 (flameproof)

10. Transmission mode: 4～20mA or switch value

11. Interface flange: According to the national Ministry of Chemical Industry, Ministry of Machinery and American standards, it can be specially customized according to the needs of users.

Note: When the installation of the side-mounted magnetic flap level gauge is affected by the environment, the space position L1<300 should be clearly mentioned when ordering.