GFP high voltage rubber sheathed cable, UGF cable, UGFP6KV mining rubber sheathed flexible cable - high voltage mining cable

1. Model and name: UGF-6000V mining rubber sheathed flexible cable

UG-6000V Mine Rubber Sheathed Flexible Cable

2. Executive standard: TL/J30-94

3. UGF cable use: AC rated voltage 6kv and below mobile power distribution devices and mining machinery; lifting and transportation machinery, etc.

4. Use characteristics: The rated voltage of the cable is 6kv;

The long-term operating temperature of the cable is +65°C.

The minimum bending radius of the cable is 6 times the diameter of the cable.

The neoprene rubber or the mixed rubber mainly composed of neoprene rubber is used for the UGFP cable sheath, and the oil resistance and non-flammability are not evaluated.

5. The specifications of the cable should meet the requirements of the following table

Number of cores×section Conductor structure Number of wires/wire diameter Nominal insulation thickness Nominal sheath thickness Nominal outer diameter DC resistance of the main core of the wire

EUR/km

UGFP high voltage rubber sheathed cable, UGF cable, UGFP cable

Main wire core Ground wire

ugf 3×6+1×6 84/0.30 4.5 1.4 6.0 40.3 3.30

ugf 3×10+1×10 84/0.40 4.5 1.6 6.0 43.8 1.91

ugf 3×16+1×16 126/0.40 4.5 1.6 6.0 46.8 1.21

ugf 3×25+1×16 196/0.40 4.5 1.6 6.0 49.3 0.78

ugf 3×25+1×16 276/0.40 4.5 1.6 6.0 52.0 0.554

6. Technical performance:

The DC resistance of the conductor at 20°C is shown in the table above.

The insulation resistance between the cores of the finished UGFP cable, converted to a length of 1km and a temperature of 20°C, should not be less than 100 megohms.

The main core of the finished UGEFP cable and between the main core and the ground wire should be able to withstand the voltage test of AC 50 Hz and 15,000 volts for 5 minutes without breakdown.

7. Delivery requirements:

The delivery length of the cable shall not be less than 100m, and the allowable length shall not be less than 20m

Short cable delivery, the delivery quantity should not exceed 10% of the total delivery length

The length measurement error should not exceed ±0.5%.